Voltar ao blog
Guias Práticos 2026-11-21 Grand Trunk | Goods For The Road | Superior Hammocks 0 visualizações

How to Hang a Hammock with Tree Slings Kit

How to Hang a Hammock with Tree Slings Kit

Learn how to quickly set up your hammock using the Grand Trunk Tree Slings Hammock Hanging Kit. Tree-friendly, park-approved, and easy to adjust.

What the Tree Slings Kit Gives You

The Grand Trunk Tree Slings Hammock Hanging Kit is designed to get your hammock up quickly while protecting the trees you hang from. Each kit includes two 10-foot straps made from high-grade woven polyester, each with pre-knotted loops for easy height adjustment. The straps are 5 mm thick and rated for a combined weight capacity of 400 lbs (181 kg). A set of tree protectors—nylon webbing sleeves—slip around the strap where it contacts the tree bark. The whole kit weighs 8 oz (226 g) and packs into its own stuff sack.

Hanging Your Hammock in Minutes

Follow these steps to set up your hammock using the Tree Slings kit. No tools or extra hardware are needed beyond the straps and your hammock.

  1. Choose your trees: Pick two sturdy trees roughly apart. The straps are 10 feet each, so you have enough length to wrap around trunks up to about in diameter. Make sure the trees are healthy and at least in diameter.
  2. Wrap the tree protector: Slide the nylon tree protector around the strap at the point where it will contact the tree. This webbing meets width requirements for state and national parks, so you can hang without worrying about bark damage.
  3. Loop the strap around the tree: Pass the strap around the tree and through its own loop to create a secure anchor. The pre-knotted loops along the strap let you choose how high or low the hammock hangs.
  4. Attach your hammock: Clip or tie your hammock’s suspension to one of the pre-knotted loops on each strap. The kit works with most hammocks. Adjust the height by moving the hammock to a different loop.
  5. Test and adjust: Sit gently in the hammock to check the height and sag. Adjust both ends until the hammock sits about off the ground at the lowest point. The pre-knotted loops make it easy to fine-tune without retying.

Why the Tree Protector Matters

Many parks and natural areas require hammock straps to be at least wide to prevent damage to tree bark. The included tree protectors meet that requirement, so you can set up in most state and national parks without issue. The nylon webbing distributes the load and avoids cutting into the bark, keeping the trees healthy and your setup park-friendly.

Tree Slings Kit Specs at a Glance

  • Tree Slings Hammock Hanging Kit: Two 10-foot straps made of high-grade woven polyester, 5 mm thick. The length gives you flexibility for different tree spacings, and the woven polyester is strong yet lightweight.
    Tree Slings Hammock Hanging Kit
    Tree Slings Hammock Hanging Kit
  • Tree Slings Hammock Hanging Kit: Combined weight capacity of 400 lbs (181 kg). This rating covers most single-person hammock setups with room for gear. Always stay within the limit for safe hanging.
  • Tree Slings Hammock Hanging Kit: Includes tree protector that meets width requirements for all State Parks. You can hang in parks that enforce minimum strap width, without needing extra gear.
  • Tree Slings Hammock Hanging Kit: Pre-knotted for easy hanging and adjusting height. No knot-tying skill is needed—just clip or tie to the nearest loop. Adjusting is as simple as moving to a different loop.

Tips for a Comfortable Hang

For the best comfort, aim for a sag angle when sitting in the hammock. This reduces pressure points and keeps you from feeling like you’re in a banana. If you’re new to hammocking, start with the straps a little higher than you think you need—you can always lower the hammock by moving to a lower loop. The pre-knotted design makes these adjustments quick, so you can spend less time fiddling and more time relaxing.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil