Setting Up the ROVR Hanging Chair for Camping

Quick answer

Set up the ROVR hanging chair by finding two sturdy anchor points, attaching the suspension, and adjusting the seat height for a comfortable upright sitting position.

Step-by-step setup

1. 1. Inspect your gear: Unpack the ROVR chair and check that the suspension lines, carabiners, and fabric are free of damage. Common mistake: forgetting to untie knots from the previous use, which can weaken the suspension.
2. 2. Attach tree straps: Wrap each tree strap around a tree at about shoulder height. Feed the end through the loop and pull tight. Keep the strap flat against the bark to avoid slipping. Common mistake: wrapping the strap too low, which forces you to sit too close to the ground. Aim for straps at chest height to start; you can adjust later.
3. 3. Connect the suspension: Clip the carabiner on each suspension line to the loop on the tree strap. Make sure the carabiner gate is fully closed and not cross-loaded. Common mistake: attaching both lines to the same strap, which makes the chair lopsided.
4. 4. Adjust the seat height: Sit in the chair and check that your thighs are roughly parallel to the ground. Shorten or lengthen the suspension lines using the adjustment knots or buckles. Common mistake: hanging the chair too low, which puts strain on your knees when standing up. The ideal seat height lets you sit and stand without effort.
5. 5. Test and tweak: Sit gently at first, then shift your weight to ensure the chair is stable. If the chair tilts forward or backward, adjust the suspension length on one side. Common mistake: skipping the test and discovering the chair is uncomfortable after you’ve settled in with a drink or book. A 30-second test can save you from a wobbly evening.

Product details

• ROVR™ Hanging Chair: The ROVR is a hanging chair that’s uniquely contoured to an upright sitting position. This design means you can sit comfortably for meals or conversations without slouching, unlike a traditional hammock.