Moab All-In-One Shelter Hammock Setup Guide
By Grand Trunk | Goods For The Road | Superior Hammocks | Published: 2026-10-23
Category: How-to Guides
Learn how to set up the Moab All-In-One Shelter Hammock for camping, backpacking, or day trips. Step-by-step instructions for hammock, canopy, bivvy, and more.
Quick answer
The Moab All-In-One Shelter Hammock converts between a hammock, canopy, A-frame bivvy, lean-to, tent footprint, and sunshade. Start by choosing the mode that fits your trip, then follow the step-by-step setup for that configuration.
Why the Moab works for different trips
The Moab All-In-One Shelter Hammock is designed for backpackers who want one piece of gear that adapts to changing conditions. Its integrated bug net and rain fly mean you can go from a lightweight hammock to a ground shelter without carrying extra components.
The trade-off is that no single mode is as specialized as a dedicated tent or hammock. For ultralight trips where every gram counts, the versatility often outweighs the slight weight penalty. For car camping, the quick-conversion features save setup time.
How to set up the Moab All-In-One Shelter Hammock
- Choose your mode: Decide whether you need a hammock, canopy, A-frame bivvy, lean-to, tent footprint, or sunshade. The Moab’s straps and pole sleeves allow each configuration without tools. If you expect rain, the A-frame bivvy or lean-to gives better ground coverage than the hammock mode.
- Set up the suspension: For hammock mode, wrap the tree straps around two trees about 12–15 feet apart. Attach the carabiners to the hammock end loops. Adjust the strap height so the hammock sits at a 30-degree angle when you sit in it. Straps too tight create a stiff lay; too loose and you’ll bottom out. Aim for a gentle banana curve.
- Deploy the bug net and rain fly: Unzip the integrated bug net and clip it to the ridgeline. Spread the rain fly over the hammock and stake the corners at 45-degree angles. Leave the fly loose for airflow or tighten it for storm protection. Staking the fly too close to the hammock reduces ventilation and causes condensation on cool nights.
- Convert to ground shelter: To use the Moab as an A-frame bivvy or lean-to, stake the four corners of the shelter to the ground. Insert the supplied poles into the sleeves to lift the head end. Adjust the rear stake for more or less interior space. On hard or rocky ground, use rocks or logs as deadman anchors instead of stakes.
- Pack down and store: After your trip, shake out debris, air-dry the hammock if damp, and fold it into the stuff sack. The Moab packs down smaller than a separate tent and fly, saving space in your backpack. Always dry the hammock before storing to prevent mildew on the fabric and bug net.
Gear used in this guide
- Moab All-In-One Shelter Hammock: The MOAB can be used as a hammock, a canopy, A-frame bivvy, lean-to shelter, tent footprint or sunshade. You don't need separate shelters for different weather or terrain — one hammock handles forest, beach, and alpine campsites.
Moab All-In-One Shelter Hammock
